You’ll discover a beautiful hardwood floor hidden underneath when you’re removing floor coverings. However, any leftover sticky adhesive can ruin the beauty of wooden floors.
Nothing looks more luxurious and aesthetically pleasing than a well-maintained hardwood floor. But, maintaining wooden floors is a different story altogether because they require proper cleaning and polishing regularly. So, if you are planning to strip off all the floor coverings while remodeling, you’ll need to work extra hard to maintain the wooden floor underneath.
When you remove the coverings, the leftover sticky adhesives can ruin the entire hardwood floor surface. That’s why it’s best to have some tips and tricks up your sleeves for effectively removing glue from wooden floors, and we’re here to help you out. Today, we’ll discuss some easy DIY methods to get rid of glue from hardwood floors and much more.
- How Hard is it To Remove Glue From Hardwood Floors?
- 5 Easiest Ways To Remove Glue From Wood Floors
- Best Adhesive Removers For Wood Floors
- FAQs: Removing Glue from Hardwood Floors
How Hard is it To Remove Glue From Hardwood Floors?
While it’s easier to clean away dust and grease from wooden floors, glue and leftover adhesives offer a little more challenge. They are sticky and can cling to the floor surface if not dealt with properly. So, you might have to go an extra mile to clean them off the floor surface.
The first thing you need to remember while removing adhesive from hardwood floors is not to use an invasive technique that might ruin the floor surface. If it’s a small amount of glue that you’ve accidentally dropped on the floor, you can wipe it off using a damp cloth.
However, if you are trying to clean super-glue or leftover adhesives, it’ll require some extra work. Adhesives or super-glue tend to solidify once they dry off completely. And you need to bring them back to their original liquid state to make the cleaning process much easier.
Using a heat gun or a hairdryer can help you liquify the hard adhesive, and once it’s liquid again, you can wipe it off the floor. In contrast, if you try to scrape off the remaining adhesive, you might ruin the beautiful hardwood floor surface. And not to mention, scraping off super-glue or adhesives from the floor is a more labor-intensive process than using a heat gun.
Other than this, you can use any high-quality commercial adhesive remover that’s specially formulated to remove adhesives from the wooden flooring. If you choose to use chemical adhesives, don’t forget to wear protective rubber gloves to avoid skin burns and irritations.
5 Easiest Ways To Remove Glue From Wood Floors
While removing leftover adhesive or glue from a wooden floor can be a struggle, it’s not impossible. In this section, we will highlight five easy DIY methods that you can apply to get the glue off your hardwood floors without any professional help.
1. Use Towels And Hot Water
Using hot water to remove dry glue is the most old-school and tried-and-true method. Take a bowl, add a few cups of normal water, and place it on your stove until it comes to a boil.
Once the water is boiling, take the bowl carefully off the stove and soak a clean towel. Make sure not to burn your hands while soaking the towel in the boiling water.
Place the wet towel on the dry adhesive or glue so that the hot water can melt and loosen it. Let the towel rest for three to five minutes for the hot water to do its work.
After the glue loosens up a bit, wipe it off with a dry towel and let the floor surface dry up completely. Once the floor is dry, use a putty knife or a floor scraper to gently scrape off any remaining adhesive. But, be careful not to put too much pressure while scraping off the adhesive because it may leave permanent scratch marks on your hardwood floors.
2. Use A Heat Gun
Another easy way of removing dry glue from wooden floors is to use a heat gun, which helps to liquefy the hardened glue. A hairdryer will also do the trick if you don’t have a heat gun lying around in your hardware cabinet.
Plug the device into the power socket and set the right temperature for melting the stubborn adhesive. Then, apply the heat directly over the adhesive by placing the heat gun or hairdryer as close to it as possible without touching it.
You can see the dry glue melting to its original liquid form after a while. Once the adhesive has completely melted, wipe it off with a dry and clean cloth and use a floor scraper to gently remove any leftover residue.
It’s a dry technique for removing glue from your hardwood floors, and you don’t need to go through the hassle of boiling water or soaking towels. Heat guns work like magic by removing even the most persistent adhesives and super-glue from wooden floors.
3. Try Acetone
When scraping off leftover adhesive isn’t working, it’s time to bring out the good-old acetone. Any old nail polish should work as an excellent source of acetone, so you don’t need to raid the local store in search of this chemical solvent. Acetone essentially breaks the chemical bonds of the adhesive and loosens it, making the cleaning process much easier.
Wet a clean towel or a cotton ball with some acetone and rub it on the adhesive on your wood flooring. Keep the area wet, as acetone can evaporate quickly, and let it sit on the stubborn adhesive for around 15 minutes. In that way, the acetone will get time to act on the adhesive and loosen it up.
Next, wipe off the entire area using a clean but old towel and rub the area vigorously to get rid of any remaining adhesive residue. You can repeat the process as much as you want until you get rid of all the adhesive.
4. Sand it Down
Using sandpaper is the ultimate weapon in your arsenal to remove adhesives from hardwood floors. Depending on the roughness of your floor, you can choose a course or fine-grit sandpaper. But we recommend using sandpaper having a fine grit on a polished hardwood surface to avoid scratching the floor.
Once you choose the sandpaper, it’s time to get down to business, so fold the sandpaper in half and gently sand the area. Be careful while sanding to avoid ruining the fine wooden floor and check the work from time to time to prevent over-sanding. It can be a labor-intensive process, but it’s quite effective in removing glue or adhesive from hardwood floors.
5. Apply Vinegar
When it comes to removing any stain or adhesive, using some white vinegar is bound to produce the best results because it’s a tried and tested formula. Take two teaspoons of white vinegar and mix it with half a cup of water and soak a clean towel in this vinegar solution. You can also soak the towel directly in white vinegar if you are looking for a stronger approach.
Now, take the wet towel and start wiping the adhesive off the wooden floor slowly, allowing the vinegar to act on the adhesive to break it down and loosen it. Then, scrape off the softened adhesive gently from the floor and clean the entire area using a wood cleaner.
Related Read: How to Remove Cooking Oil off Floor
Best Adhesive Removers For Wood Floors
We have told you about some of the most potent DIY cleaning techniques to remove glue from your hardwood floors, and it’s time to look into some commercial adhesive removers. In the list below, we have done a quick review of four of the best adhesive removers for wooden floors.
1. Goo Gone Pro-Spray Gel
Whatever gooey or sticky problem you might be facing, this pro-spray gel from Goo Gone can be your perfect solution. It’s excellent for removing any persistent adhesive and keeping your hardwood floors crystal clean, thanks to its powerful, drip-free gel. The advanced citrus formula of this adhesive remover ensures that you can enjoy a lemony freshness every time you clean the floors.
And not just wood glue or adhesive, the Goo Gone pro-spray gel is excellent for cleaning elbow grease, dirt, wet paint, and any kind of mess from your floors. On top of this, the product is completely safe for use on multiple surface types. You can use it on your wooden floors, carpets, and fabrics without worrying about damaging them.
The easy-to-use spray bottle helps you to apply the adhesive remover directly over the remaining adhesive to avoid unnecessary wastage. One bottle of Goo Gone pro-spray gel will last months if you store it properly and it’s one of the best products to keep your hardwood floors spick and span.
However, don’t forget to wear your protective latex gloves while working with pro-spray gel because it contains strong chemicals that can cause skin irritations. Also, make sure to keep it away from pets and children.
- Cleans almost anything
- Works on different surfaces
- Easy-to-use spray bottle
- No harsh odor
- Not safe for kids and pets
2. Krud Kutter Adhesive Remover
The powerful cleaning formula of the Krud Kutter adhesive remover is ideal for removing any leftover adhesive, glue stains, grease, or dirt from wooden floors. You can also use it to clean stains from fabrics and kitchen countertops without worrying about ruining the surface as it’s xylene-free. It can help you keep your entire house clean and hygienic with minimum effort.
On top of this, the super-concentrated and ready-to-use formula allows you to spray the liquid directly on the remaining adhesive or stain without any hassle. Along with maintaining the cleanliness of your house, the Krud Kutter adhesive remover protects the environment owing to its non-flammable and biodegradable qualities.
It is also a water-based adhesive remover containing no toxic solvents, making it a safer alternative to other abrasive and harsh solvent-based removers. Rest assured you won’t ruin the beautiful natural luster of your wooden floors after using this adhesive remover.
But, it can be harmful to kids below three years old because they might start playing with the adhesive remover or even ingest it. So, it’s best to keep it away from toddlers as a necessary safety precaution.
- Excellent for hardwood floors
- Biodegradable and non-flammable
- Safe to use at home
- Non-solvent adhesive remover
- Harmful for children under three years
3. Dumond Goo & Adhesive Remover Spray
The Safe ‘n Easy Goo & Adhesive Remover Spray from Dumond is ideal for removing sticky label marks or wood glue without damaging the polished paint of your hardwood floors. And not just wooden floors, the adhesive remover works quite well on porcelain, fiberglass, stainless, and plastics, thanks to its mild citrus formula that won’t damage your floors.
The formula also offers a fresh lemon aroma every time you use this adhesive remover to clean your floors without leaving behind any harsh chemical odor. It is even non-flammable and contains no toxic fumes that can cause any possible health hazards. Thus, this water-based citrus adhesive remover offers a safe solution to remove glue from wooden floors.
Made in the USA, it is specially designed for home and professional use. Even when you are trying to remove chewing gum or wood glue, this adhesive remover spray has got your back. The manufacturer also offers a full refund if you are not happy with the product.
On the downside, this adhesive remover spray might not be strong enough to remove persistent adhesive or super-glue from hardwood floors. Even though the mild formula is surface-friendly, it doesn’t work on dry wood glue stains, which can be an inconvenience.
- Works perfectly on painted woods
- Refreshing lemon aroma
- Surface-friendly citrus formula
- Full refund available
- Too mild for super-glue removal
4. Bona Hardwood Floor Cleaner
The hardwood floor cleaner from Bona comes in a ready-to-use refill bottle that ensures a smoother pour with minimum spilling and wastage of the adhesive remover. It is specially formulated to remove any sticky mess from hardwood floors without any hassle since it’s residue-free. You can use it with your cleaning mop or a clean cloth to remove glue or grime from wooden floors.
Added to this, the clean ingredients of this floor cleaner ensure that it’s 100% safe for daily use without causing any health hazards to you, your pets, or the environment. The Safer Choice certification speaks volumes about the eco-friendly quality of this product and it meets the US EPA product standards.
It is a water-based solution and doesn’t produce any toxic fumes or harsh chemical odor. The adhesive remover is also residue-free, so you won’t be left with any greasy residue after cleaning the floor using this floor cleaner. We found that the polished finish of hardwood floors remains intact after using this adhesive remover.
Furthermore, the pH-neutral formula ensures that the floor cleaner doesn’t ruin the natural colors of your wooden floors. But try to avoid using this adhesive remover if your floor has a waxed finish because it might damage the wax layer.
- Ready-to-use formula
- Safe to use
- Water-based adhesive remover
- Safer Choice certified
- Leaves the floor looking dull and hazy
FAQs: Removing Glue from Hardwood Floors
1. What will dissolve glue from wood?
Dissolving wood glue can be a bit tricky, but you can do it quite easily using the right chemicals. The most effective method is to apply some acetone because the solvent will break the chemical bonds of the glue and dissolve it within minutes.
You have to make sure that the acetone gets around 15 minutes to act on the glue without evaporating. So, keep the area wet to allow acetone to dissolve and break down the glue on wooden floors.
Wear your protective gear while working with acetone, as it can be toxic. Once the glue is completely dissolved, vigorously rub the floor to wipe off all the remnants of the adhesive.
2. Can you remove dried glue from the floor?
The best way to remove hard and dry glue is to apply some direct heat. This will slowly melt the glue to its original liquid form, and you can easily wipe it off the floor.
You can use a heat gun or a hairdryer for this purpose. Or, you can soak a clean towel in a pot of boiled water and place it over the dried glue stain to let the hot water loosen up the adhesive.
If the glue starts to dry up and solidify, apply heat continuously until it is completely removed from the floor. After wiping off all the glue, you can use a plastic floor scraper to scrape off any leftover residue.
3. Will vinegar remove glue from wood?
White vinegar is quite effective in removing glue from wooden floors if you slowly rub it on the glue. You can apply the vinegar directly or mix it with water for a gentler approach. White vinegar acts on the glue and breaks it down, making the cleaning process much more efficient and hassle-free.
However, be careful while measuring the amount of vinegar, as too much of it can cause discoloration of your hardwood floors.
4. How to get carpet glue off hardwood floors?
If your carpet glue is tar-based, you can use a tar remover containing mineral spirits to remove the glue. The mineral spirits will strip away all the floor wax while cleaning the tar-based carpet glue.
But, to remove other carpet glue, you can apply any suitable oil solvent. You can even use mineral oils to loosen up the glue, and once it’s loose, gently pry away the remaining adhesive using a putty knife.
5. How to remove super-glue from wood without acetone?
If you don’t want to use acetone, applying white vinegar is the most organic way of removing super-glue. You can also try a combination of mineral oils, such as lemon oil or eucalyptus oil to get rid of super-glue. Other than this, heating can help melt the glue, and you can easily wipe it off the wooden floors.
With that, we come to the end of our detailed guide regarding how to remove adhesive and glue from wooden floors. You can apply any of the DIY methods that we’ve mentioned to effectively deal with any sticky mess and maintain the natural luster of your hardwood floors.
At the same time, if you are looking for a surface-friendly and safe adhesive remover, you can try out the Goo Gone Pro-Spray Gel to get the best results. Try using the adhesive remover, along with our suggested DIY methods, to remove even the most stubborn adhesive without losing the polished finish of wooden floors.
And on that note, we’ll sign off. Until next time!